Tell us what the toilet is doing. Running, leaking, clogged, or rocking, we know the likely cause before we roll. We schedule a window that works for you, including same-day and 24/7 emergency slots.
Our Services
Toilet Repair and Installation Services
From a flapper swap to a full rough-in, we cover every toilet problem Phoenix homeowners run into. Our trucks carry wax rings, flanges, fill valves, and supply lines, so we finish most work the same day. If you need affordable Toilet Installation in Phoenix, Arizona, we handle that too, start to finish.
01
Upfront optionsNo work before you approve it
02
Respectful serviceClean floors, clear communication
03
Real guaranteesRepairs backed in writing
04
Local techniciansLicensed local professionals
What we do
Toilet Repair and Installation Services
From a flapper swap to a full rough-in, we cover every toilet problem Phoenix homeowners run into. Our trucks carry wax rings, flanges, fill valves, and supply lines, so we finish most work the same day. If you need affordable Toilet Installation in Phoenix, Arizona, we handle that too, start to finish.
Toilet Installation
We set new toilets on a level flange, replace the wax ring and bolts, and test for leaks before we leave. Whether you bought a Kohler or a Toto, we install it to code and haul the old one away. Most installs take 60 to 90 minutes.
Explore →
Toilet Replacement
Replacing a cracked or outdated toilet is cheaper than repeated repairs. We pull the old unit, inspect the flange, and set a new one with a fresh seal. We can match your existing rough-in so there is no floor work needed. Same-day slots are common.
Explore →
Running Toilet Repair
A running toilet can waste hundreds of gallons a day. We check the flapper, fill valve, and flush valve, then swap the worn part with a Fluidmaster or Korky replacement. Most running toilet fixes take under an hour and stop the noise immediately.
Explore →
Leaking Toilet Repair
Water around the base usually means a failed wax ring or loose tank bolts. We pull the toilet, inspect the flange, and reseal with a new wax ring and caulk. If the flange is cracked, we repair it before resetting the bowl. Leak stops the same visit.
Explore →
Clogged Toilet Repair
We clear clogs with a toilet auger first, then a plumber's snake if the blockage sits deeper in the line. An inspection camera confirms the line is clear before we leave. No harsh chemicals, no damaged porcelain. Most clogs clear in 20 to 40 minutes.
Explore →
Toilet Tank Repair
Tank leaks, cracks, and sweating tanks get fixed fast. We replace flappers, fill valves, and flush valves, and check the tank-to-bowl gasket for wear. If the tank itself is cracked, we quote a replacement on the spot. Parts are on the truck.
Explore →
Toilet Bowl Repair
Cracked or chipped bowls cannot be patched safely. We replace the bowl or the full toilet, reset it on a new wax ring, and check the flange for damage. We also fix loose bowls that rock on the floor. Most bowl jobs finish in one visit.
Explore →
Toilet Flush Valve Repair
A weak or stuck flush usually points to the flush valve or flapper. We test the flush, replace the worn assembly, and adjust the chain and handle. You get a full, quiet flush without holding the lever down. Usually done in under an hour.
Explore →
Toilet Fill Valve Repair
A noisy or slow-filling tank needs a new fill valve. We shut off the supply, swap the valve for a Fluidmaster or Korky unit, and set the water level correctly. We also check the supply line and shut-off valve while we are in there.
Explore →
Toilet Flapper Repair
The flapper is the number-one cause of a running toilet. We replace worn or warped flappers with a Korky or Danco model that fits your tank, then test the seal. This is one of the cheapest fixes we do, and it stops water waste immediately.
Explore →
Toilet Wax Ring Replacement
A failed wax ring leaks at the base and can rot the subfloor. We pull the toilet, scrape the old wax, set a new ring, and reset the bowl with new flange bolts. We check the flange for cracks before sealing. Leak-free when we leave.
Explore →
Toilet Seal Replacement
Tank-to-bowl gaskets and base seals wear out over time. We replace the seal, tighten the tank bolts evenly, and test for drips. If the leak damaged the floor, we tell you what we see. Most seal jobs take 45 minutes.
Explore →
Toilet Supply Line Repair
A weeping supply line can flood a bathroom fast. We replace braided or corroded lines, check the shut-off valve, and tighten every connection. If the valve is seized, we swap it while the water is off. Quick fix, big payoff.
Explore →
Toilet Shut-Off Valve Repair
A shut-off valve that will not close means you cannot stop a leak. We replace the valve, solder or thread the new one in, and test it under pressure. This is a small job that protects your whole bathroom. Usually done in under an hour.
Explore →
Toilet Handle Repair
A loose or stuck handle usually needs a new lever arm or a chain adjustment. We replace the handle, set the chain length, and test the flush. If the handle is fine but the flush is weak, we check the flapper and flush valve too.
Explore →
Toilet Seat Replacement
We install new seats and lids on any standard or elongated bowl, including soft-close and bidet-ready models. Old bolts get replaced so the seat sits tight. Ten-minute job for us, and you get a clean, stable seat.
Explore →
Toilet Lid Repair
Cracked or loose lids get replaced with a matching seat and lid set. We check the hinges and bolts, then tighten or swap as needed. If the seat is fine and only the lid is broken, we can source a matching lid. Quick visit.
Explore →
Toilet Bidet Installation
We install bidet seats and handheld bidet sprayers, tapping the supply line and checking for leaks. We set the water pressure and test every setting before we leave. Works with most Kohler, Toto, and American Standard toilets. About an hour.
Explore →
Smart Toilet Installation
Smart toilets need a dedicated outlet and a stable water supply. We handle the rough-in, set the unit, connect the supply, and test the electronics. We also verify the flange height matches the new unit. Most installs take two to three hours.
Explore →
Toilet Auger Service
For clogs that a plunger cannot move, we run a toilet auger through the trapway. The auger protects the porcelain and clears the blockage without chemicals. If the clog is deeper, we switch to a plumber's snake. Most auger jobs finish in 20 minutes.
Explore →
Toilet Snake Service
When the clog sits past the trapway, we run a plumber's snake through the drain line. We check the line with an inspection camera afterward to confirm it is clear. This is the right call for repeat clogs. Usually done in under an hour.
Explore →
Toilet Camera Inspection
An inspection camera shows us exactly what is blocking the line or damaging the pipe. We use it after repeat clogs, slow drains, or sewer odor. You get a clear answer instead of a guess. Most inspections take 30 to 45 minutes.
Explore →
Toilet Venting Repair
A gurgling toilet or sewer odor often means a blocked or broken vent. We inspect the vent stack, clear blockages, and repair broken sections. Proper venting keeps the flush smooth and the smell out. Most vent jobs finish in one visit.
Explore →
Toilet Water Pressure Repair
Weak flushes and slow fills often trace back to water pressure or a clogged supply. We test the pressure, check the shut-off valve and supply line, and clear any restriction. If the fill valve is the culprit, we replace it. Same-day service.
Explore →
Toilet Rough-In Repair
A rough-in that is off by even half an inch causes leaks and rocking. We measure the rough-in, repair or replace the flange, and reset the toilet to match. This is common after flooring work. We get it level and sealed.
Explore →
Toilet Floor Flange Repair
A cracked or broken flange means the toilet cannot seal. We cut out the old flange, install a new one, and reset the toilet on a fresh wax ring. If the floor is damaged, we tell you what we find. Leak-free when we leave.
Explore →
Toilet Caulking and Sealing
We caulk around the base of the toilet to keep water out of the subfloor and stop the bowl from shifting. We clean the old caulk first, then apply a fresh bead of sealant. This is a small job that prevents big water damage. About 30 minutes.
Explore →
Toilet Odor Removal
Sewer odor around a toilet usually means a failed wax ring, a dry trap, or a vent problem. We find the source, fix the seal or vent, and confirm the smell is gone. No masking sprays. Most odor calls resolve in one visit.
Explore →
Toilet Emergency Repair
When a toilet overflows or a tank lets go, we answer 24/7 Toilet Repair Phoenix calls and get a plumber out fast. We shut off the water, stop the leak, and make the repair. Nights, weekends, and holidays included. Call and we roll.
Explore →
From call to complete
How Our Toilet Repair Process Works
Your plumber inspects the toilet, tank, flange, and supply line. We test the flush, check for leaks, and confirm the actual problem. You get a clear explanation and a price before any work begins.
We fix it with parts from the truck. Flappers, fill valves, wax rings, flanges, and supply lines are all on hand. If it is an installation, we set the new toilet, seal it, and test it. Most jobs finish the same visit.
We run multiple flushes, check for leaks at the base and supply, and confirm the toilet is stable. Then we clean up the work area and haul away old parts or the old toilet. You get a walkthrough before we leave.
STEP 01Call or Book
Tell us what the toilet is doing. Running, leaking, clogged, or rocking, we know the likely cause before we roll. We schedule a window that works for you, including same-day and 24/7 emergency slots.
Our standard
Why Phoenix Homeowners Call Us First
We are not the biggest plumbing company in Phoenix, and that is on purpose. You get a licensed plumber who knows toilets, not a rotating crew of subs. Twelve years in Maricopa County means we have seen every toilet problem this desert climate throws at a house.
Licensed, Insured, and Local
We are a state-licensed plumbing contractor with ROC registration, bonded and insured. Every technician carries OSHA safety compliance training. That means code-correct work that meets Uniform Plumbing Code and International Plumbing Code standards, and a crew that shows up in uniform with shoe covers.
Parts on Every Truck
Our trucks stock wax rings, flanges, flappers, fill valves, flush valves, supply lines, and shut-off valves from Fluidmaster, Korky, Danco, Moen, and Delta. That means most repairs finish in one trip instead of two. If we need a specialty part, we tell you before we leave.
Upfront Pricing, No Surprises
You get the price before we start. No hidden fees, no surprise add-ons. If the job turns out simpler than expected, the price drops. That is how we have kept customers in Ahwatukee, Laveen, and Sunnyslope calling back for twelve years.
Good questions
Toilet Repair Phoenix AZ Questions
Here are the questions we get most often from Phoenix homeowners. If yours is not here, call us and we will give you a straight answer.
+16028350160 →Most toilet repairs in Phoenix run $129 to $449 in 2026, depending on the part and the labor. A flapper or fill valve swap sits at the low end. A wax ring, flange repair, or clog clearing lands in the middle. We quote the price before we start, so you know the number upfront.
The best company is the one that shows up when it says it will, quotes the price before starting, and carries the parts to finish the job. We have been doing Toilet Repair Phoenix AZ since 2014, licensed and insured, with parts from Fluidmaster, Korky, and Kohler on every truck. Call and judge for yourself.
Yes. We answer 24/7 Toilet Repair Phoenix calls for overflows, burst supply lines, and tank failures. A plumber gets dispatched, shuts off the water, and makes the repair. Nights, weekends, and holidays included. Call +1 (602) 835-0160 and we roll.
Look for a licensed plumber who handles the rough-in, flange, wax ring, and final seal, not just the drop-in. Ask if they haul away the old toilet and test for leaks. We do all of that on every Toilet Installation Phoenix job, and most installs finish in 60 to 90 minutes.
Toilet installation in Phoenix, Arizona typically runs $249 to $549 in 2026, including the wax ring, bolts, and haul-away of the old unit. Smart toilets and bidet seats cost more because of the outlet and supply work. We quote the full price before we start.
Ready when you are
Need Toilet Repair Phoenix AZ Today?
Running, leaking, or clogged, we fix it fast. Licensed plumbers, parts on the truck, upfront pricing. Call +1 (602) 835-0160 and we will get a plumber to your door.
Call Now →
Request an appointment
Contact Phoenix Toilet Repair Co
Call us at +1 (602) 835-0160 or email info@phoenixtoiletrepairco.com. We answer 24/7 for emergencies and schedule same-day appointments for standard repairs. If you leave a message after hours, we call back first thing in the morning. Most jobs get a plumber to your door the same day.
Call anytime+16028350160
Email the officeinfo@toiletrepairphoenixaz.pages.dev
Office hoursOpen 24 hours · 7 days a week